Glass glue is a commonly used adhesive. It is used in the decoration of kitchens and bathrooms, as well as on glass doors and windows.

　　Because of the humid environment in these places, glass glue is very easy to mold and black, which not only affects the appearance, but also breeds bacteria and endangers the health of you and your family.

　　So, what should I do if the glass glue becomes moldy and black? Let me introduce two simple methods!

　　01 Clean and wipe

　　As we all know that 84 disinfectant has a certain bleaching effect, we can mix water and 84 disinfectant in a ratio of about 3:1, and then use a wet wipe to dip a small amount of mixed water and wipe it. If the stain is stubborn, you can also Use steel wire balls and brushes to improve the cleaning effect.

　　In addition, white vinegar has a good bactericidal effect, and it is not irritating to mucous membranes, skin and respiratory tract, so if the area of mildew is small, we can use white vinegar + toothbrush to clean it.

　　02 Replace glass glue

　　If the glass glue mildew is more serious, we need to remove the original glass glue at this time, and then re-process it. This process is actually not as difficult as imagined.

　　To put it simply, just the following steps:

　　1. Prepare four tools: knife, glass glue, glue gun, masking paper

　　2. Use a knife to remove the glass glue before.

　　3. Stick masking paper on the edge to prevent the glass glue from spilling into other places.

　　4. Use a glue gun to make a circle of glue along the seam, and use a scraper to smooth the surface.

　　5. Tear off the masking paper and wait 12 hours for the glass glue to dry.

　　Is not it simple?