Hubei Wuda Photon Technology Co., Ltd.
WD-878 special glue for large glass
Classification：
1. Point type and fully transparent glass curtain wall caulking and sealing 2. Gap filling and sealing of large flat glass and daylighting roof craft glass 3. Assembly and sealing of the aquarium 4. Used for joint filling and sealing of projects with higher decoration requirements
Product description
Product Features
WD-878 is a one-component, acid-curing high-performance silicone sealant with high strength and fast curing speed.
Excellent weathering resistance.
has good adhesion to glass, ceramics, etc.
The main purpose
point type and fully transparent glass curtain wall caulking and sealing.
Large flat glass and daylighting roof craft glass are caulked and sealed.
Assembly and sealing of the aquarium.
is used for joint filling and sealing in projects with higher decoration requirements.
Use restrictions
is not suitable for all materials that will ooze grease, plasticizers or solvents.
is not suitable for the occasions where it is in contact with alkaline substances such as marble and granite.
is not suitable for use in tight and unventilated places, because silicone sealant needs to absorb moisture in the air to cure.
should not be used on frosty or wet surfaces.
should not be used in places with continuous water immersion or wet places all year round.
When the surface temperature of the material is lower than 4°C or more than 40°C, it is not suitable for construction.
Standards compliant
Q/HWD002- -2014 GB/T14683- -2003
colour
transparent
Package
WD-878 is packed in a 310ml plastic tube (300ml net capacity).
curing time
WD-878 begins to undergo a curing reaction from the surface to the inside after being extruded and exposed to air. The surface drying time is about 10 minutes, and the maximum adhesive force generated after full curing is 21 days later.
Safety Notice
This product is non-toxic after fully cured, but it should avoid contact with eyes before curing. If contact with eyes, please rinse with plenty of water and seek medical treatment; uncured products should avoid children's contact. This product will release acetic acid during the curing process. Please pay attention to ventilation in the construction and curing area to avoid excessive acetic acid concentration which may cause adverse effects on the human body.
the way of buying
Users can buy directly from Wuhan University Photonics Technology Co., Ltd. or regional agents to ensure the quality of the products.
Key word:
Recommended products
0722-3815 263
0722-3817 118
